Improving Computer Without Re-Installation ~ Andre Eka Wardara

For those not able to re-install the OS Windows XP on his computer and do not know how to fix the mistakes and errors contained in the OS Windows XP, my time is being shared in ways and tips to fix it if the OS Windows XP on your PC in trouble Reinstalling without the need to do. Here's how:
Fixing Installation (Repair Install)If Windows XP damaged (corrupted) where you have no other operating system to boot. You can do a repair installation (Repair Install) who works as the settings (setting) the beginning.

    Make sure you have the key (key) Windows XP is valid.
    The entire process will take approximately 1 / 2 or 1 hour, depending on the spec of your computer.
    If you are prompted for an administrator password, you should choose the repair option (repair) the second, not first.
    Insert your Windows XP CD and boot from the CD.
    When it appeared the second repair option R = Repair, press the R key This will start the repair.
    Press the F8 key to agree to proceed "I Agree at the Licensing Agreement"
    Press R when the directory where you installed Windows XP. Usually C: \ WINDOWS
    It will then check the C: drive and start copying files. And automatically restart if necessary. Leave the CD in the drive.
    Next you will see a picture of "progress bar" that is part of the improvement, he looks like a normal XP installation, including "Collecting Information, Dynamic Update,
Preparing Installation, Installing Windows, finalizing Installation

    When asked, click the Next button
    When asked to enter a key, enter key (key) your valid Windows XP.
    Normally you want to remain in the same Domain or Workgroup.
    The computer will restart.
    Then you will have the same screen as the activation of the system when a normal installation.
    Register if you want (usually not necessary).
    Completed
NTOSKRNL Damaged or Missing (Missing or Corrupt)If you find an error message that "NTOSKRNL not found" / NTOSKRNL not found, do:

    Insert the Windows XP CD and booting from the CD.
    At R = Repair option appears first, press the R key
    Press the number corresponding to the location of the Windows installation you want to repair.
    Usually the number 1
    Change to the CD ROM drive is located.
    Write: CD i386
    Write: expand ntkrnlmp.ex_ C: \ Windows \ System32 \ ntoskrnl.exe
    If Windows XP is installed elsewhere, change according to location.
    Remove your CD and type EXIT
    Completed
Damaged or Missing HAL.DLL (Missing or Corrupt)If you get an error regarding a missing or corrupt hal.dll file, it is possible BOOT.INI file has the wrong configuration (misconfigured).

    Insert the Windows XP CD and booting from the CD.
    At R = Repair option appears first, press the R key
    Press the number corresponding to the location of the Windows installation you want to repair.
    Usually the number 1
    Type bootcfg / list
Displays the contents / entries in the BOOT.INI file at this time

    Type bootcfg / rebuild
Improve the configuration of the BOOT.INI file

    Remove your CD and type EXIT
Directory \ WINDOWS \ SYSTEM32 \ CONFIG damaged or missingIf you get an error with the inscription:

        "Windows Could not Start Because the following files is missing or corrupt
        \ WINDOWS \ SYSTEM32 \ CONFIG \ SYSTEM or \ WINDOWS \ SYSTEM32 \ CONFIG \ SOFTWARE "

    Insert the Windows XP CD and booting from the CD.
    At R = Repair option appears first, press the R key
    Press the number corresponding to the location of the Windows installation you want to repair.
    Usually the number 1
    Enter the administrator password if necessary.
    Write: cd \ windows \ system32 \ config
    Next depending on the location of the damage:
    Write: ren system software is damaged or corrupted
    Next again also depends on the location of the damage:
    Write: copy \ windows \ repair \ system
    Write: copy \ windows \ repair \ software
    Remove your CD and type EXIT
NTLDR or NTDETECT.COM not found (NTLDR or NTDETECT.COM Not Found)If you find an error that NTLDR is not found when booting:

    1. For the type of FAT
Please you boot from the Win98 floppy and copy the NTLDR or NTDETECT.COM filefrom the i386 directory to the drive stem / root (root) C: \

    2. For the type of NTFS partition

    Insert the Windows XP CD and booting from the CD.
    At R = Repair option appears first, press the R key
    Press the number corresponding to the location of the Windows installation you want to repair.
    Usually the number 1
    Enter the administrator password if necessary.
    Enter the following command, where X: is the address of the CD ROM drive (adjust).
    Write: COPY X: \ i386 \ NTLDR C \:
    Write: COPY X: \ i386 \ NTDETECT.COM C: \
    Remove your CD and type EXIT